Lines Matching refs:temperature
50 SMBus 2.0. Using an 8-bit ADC, the LM93 measures the temperature of two remote
53 controlled by up to four temperature zones. The fancontrol algorithm is lookup
55 temperature readings for better control of fan speed. The LM93 has four
175 The function y = f(x) takes a source temperature x to a PWM output y. This
176 function of the LM93 is derived from a base temperature and a table of 12
177 temperature offsets. The base temperature is expressed in degrees C in the
179 degrees C, with the value of offset <i> for temperature value <n> being
180 contained in the file temp<n>_auto_offset<i>. E.g. if the base temperature
200 There is an independent base temperature for each temperature channel. Note,
210 If a temperature reading falls below the base value for that channel, the LM93
244 For each temperature channel, there is a boost temperature: if the channel
247 There is also a hysteresis temperature for this function: after the boost
248 limit is reached, the temperature channel must drop below this value before
249 the boost function is disabled. This temperature is also expressed in degrees
296 temp<n>_auto_base temperature channel base
299 temperature channel offsets
302 temperature channel offset hysteresis
304 temp<n>_auto_boost temperature channel boost (PWMs to 100%) limit
306 temp<n>_auto_boost_hyst temperature channel boost hysteresis