Lines Matching refs:sysfs
73 sysfs files prochot1, prochot2, prochot1_avg, prochot2_avg, prochot1_max,
83 These intervals can be found in the sysfs files prochot1_interval and
94 non-zero integer to the sysfs file prochot_short.
101 The sysfs files prochot1_override and prochot2_override contain boolean
103 #P2_PROCHOT, respectively. The sysfs file prochot_override_duty_cycle
111 sysfs files vrdhot1 and vrdhot2. There is one value per file: a boolean for
126 the fan tachometer with a pwm) to the sysfs file fan<n>_smart_tach. A zero
134 15.10.6 of the datasheet for details.) The sysfs files pwm1_override
136 where 0 disables and 1 enables the manual control mode. The sysfs files pwm1
147 The sysfs files pwm1_freq and pwm2_freq are used to select the frequency. The
163 in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
178 sysfs files temp<n>_auto_base. The offsets are expressed in cumulative
207 the sysfs files temp<n>_auto_offset_hyst. The value in this file has the
211 will use the minimum PWM value. These values are found in the sysfs files
220 values are found in the sysfs files pwm<n>_auto_spinup_min. The value in this
223 the sysfs files pwm<n>_auto_spinup_time. The value in this file is
246 This limit is expressed in degrees C in the sysfs files temp<n>_auto_boost.
250 C in the sysfs files temp<n>_auto_boost_hyst.
256 All eight GPIOs are read by reading the bitmask in the sysfs file gpio. The
260 LM93 Unique sysfs Files