Lines Matching refs:fan
29 * force_start: bool Enables the monitoring of voltage, fan and temp inputs
46 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
47 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
50 For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present.
55 For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
56 fan[4-6] and pwm[5-6] don't exist.
138 fan tachometers. All 6 inputs have an associated min limit which triggers an
140 to the number of pulses per fan revolution that the connected tachometer
143 attribute that needs to be set to the maximum attainable RPM (fan at 100% duty-
150 This chip features 5 PWM outputs. PWM outputs 1-3 are associated with fan
151 inputs 1-3 and PWM outputs 5-6 are associated with fan inputs 5-6. PWM outputs
155 manual mode, the fan speed is set by writing the duty-cycle value to the
157 current duty-cycle as set by the fan controller in the chip. All PWM outputs
188 fan either turns completely off or keeps spinning with the low-speed
259 fan[1-6]_input RO Measured fan speed in RPM.
260 fan[1-6]_min RW Low limit for fan input.
261 fan[1-6]_alarm RO Alarm for fan input. Returns 1 if fan
264 fan[1-4]_type RW Type of attached fan. Expressed in
266 the fan generates. Supported values are
268 fan[5-6]_max RW Max attainable RPM at 100% duty-cycle.