Lines Matching refs:fan
41 temperature, two fan speeds and chassis intrusion. Measured values can
63 with independent fan speed measurement cycles counting alternating rising
64 edges of the fan tacho inputs.
66 DS1780 measurement cycle is about once per second including fan speed.
68 LM81 measurement cycle is about once per 400ms including fan speed.
82 Two fan tacho inputs are provided, the ADM9240 gates an internal 22.5kHz
87 Automatic fan clock divider
91 - fan clock divider not changed
92 - auto fan clock adjuster enabled for valid fan speed reading
96 - fan clock divider set to max
99 - low speed alarm will be asserted if fan speed is
101 - auto fan clock adjuster disabled
103 * User sets reasonable fan speed
105 - fan clock divider set to suit fan_min
106 - auto fan clock adjuster enabled: adjusts fan_min
108 * User sets unreasonably high low fan speed limit
111 - auto fan clock adjuster enabled: adjusts fan_min
113 * fan speed may be displayed as zero until the auto fan clock divider
114 adjuster brings fan speed clock divider back into chip measurement
120 fan speed amplifier circuit. The analog output is set to maximum value on
169 6 FAN1_Error fan low limit exceeded
170 7 FAN2_Error fan low limit exceeded