Lines Matching refs:interrupt

7 The PMIC Arbiter can also act as an interrupt controller, providing interrupts
13 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
14 generic interrupt controller binding documentation.
20      "intr" - interrupt controller registers
32 - interrupts : interrupt list for the PMIC Arb controller, must contain a
33                single interrupt entry for the peripheral interrupt
34 - interrupt-names : corresponding interrupt names for the interrupts
36      "periph_irq" - summary interrupt for PMIC peripherals
37 - interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
38 - #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
39     cell 1: slave ID for the requested interrupt (0-15)
40     cell 2: peripheral ID for requested interrupt (0-255)
41     cell 3: the requested peripheral interrupt (0-7)
42     cell 4: interrupt flags indicating level-sense information, as defined in
43             dt-bindings/interrupt-controller/irq.h
54 		interrupt-names = "periph_irq";
63 		interrupt-controller;
64 		#interrupt-cells = <4>;