Lines Matching refs:child
26 - Pin banks as child nodes: Pin banks of the controller are represented by child
45 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
47 as child nodes of the pin-controller node. There should be atleast one
48 child node and there is no limit on the count of these child nodes. It is
49 also possible for a child node to consist of several further child nodes
51 level child nodes is exactly the same as for first level ones and is
54 The child node should contain a list of pin(s) on which a particular pin
66 child node is specified using the "samsung,pin-function" property. The value
69 for the specified pin group. This property is optional in the child node if
70 no specific function selection is desired for the pins listed in the child
74 The child node can also optionally specify one or more of the pin
76 "samsung,pins" property of the child node. The following pin configuration
89 Note: A child should include atleast a pin function selection property or
126 child node representing the external wakeup interrupt controller should be
127 included in the pin-controller device node. This child node should include