Lines Matching refs:pin

13     - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
14     - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
15     - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
16     - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
17     - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
18     - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
19     - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller.
20     - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
22   - reg: Base address and length of each memory resource used by the pin
35 The PFC node also acts as a container for pin configuration nodes. Please refer
36 to pinctrl-bindings.txt in this directory for the definition of the term "pin
39 Each pin configuration node represents a desired configuration for a pin, a
40 pin group, or a list of pins or pin groups. The configuration can include the
41 function to select on those pin(s) and pin configuration parameters (such as
44 Pin configuration nodes contain pin configuration properties, either directly
45 or grouped in child subnodes. Both pin muxing and configuration parameters can
46 be grouped in that way and referenced as a single pin configuration node by
49 A configuration node or subnode must reference at least one pin (through the
50 pins or pin groups properties) and contain at least a function or one
51 configuration parameter. When the function is present only pin groups can be
54 All pin configuration nodes and subnodes names are ignored. All of those nodes
59 - renesas,pins : An array of strings, each string containing the name of a pin.
60 - renesas,groups : An array of strings, each string containing the name of a pin
64   pin group(s) specified by the renesas,groups property
66   Valid values for pin, group and function names can be found in the group and
70 The pin configuration parameters use the generic pinconf bindings defined in
92    [pin number within the gpio controller]
103 Example 1: SH73A0 (SH-Mobile AG5) pin controller node
133 Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps
158 Example 4: KZM-A9-GT (SH-Mobile AG5) default pin state for the MMCIF device