Lines Matching refs:in
3 This binding describes the MPP block(s) found in the 8xxx series
41 Please refer to pinctrl-bindings.txt in this directory for details of the
62 The following generic properties as defined in pinctrl-bindings.txt are valid
63 to specify in a pin configuration subnode:
68 Definition: List of MPP pins affected by the properties specified in
96 Valid values are 600, 10000 and 30000 in bidirectional mode
97 only, i.e. when operating in qcom,analog-mode and input and
99 when operating in other modes.
104 Definition: The specified pins will put in high-Z mode and disabled.
109 Definition: The specified pins are put in input mode, i.e. their input
115 Definition: The specified pins are configured in output mode, driven
121 Definition: The specified pins are configured in output mode, driven
128 sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
141 defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>