Lines Matching refs:pull

101 	Definition: The specified pins should be configured as no pull.
103 - bias-pull-down:
106 	Definition: The specified pins should be configured as pull down.
108 - bias-pull-up:
111 	Definition: The specified pins should be configured as pull up.
113 - qcom,pull-up-strength:
116 	Definition: Specifies the strength to use for pull up, if selected.
124 		    pull up is selected
166 - drive-push-pull:
169 	Definition: The specified pins are configured in push-pull mode.
211 				bias-pull-up;
212 				drive-push-pull;