Lines Matching refs:st
8 - compatible : Should be "st,miphy28lp-phy".
9 - st,syscfg : Should be a phandle of the system configuration register group
29 - st,syscfg : Offset of the parent configuration register.
34 - st,osc-rdy : to check the MIPHY0_OSC_RDY status in the glue-logic. This
37 - st,osc-force-ext : to select the external oscillator. This can change from
39 - st,sata_gen : to select which SATA_SPDMODE has to be set in the SATA system config
41 - st,px_rx_pol_inv : to invert polarity of RXn/RXp (respectively negative line and positive
43 - st,scc-on : enable ssc to reduce effects of EMI (only for sata or PCIe).
44 - st,tx-impedance-comp : to compensate tx impedance avoiding out of range values.
49 compatible = "st,miphy28lp-phy";
50 st,syscfg = <&syscfg_core>;
63 st,syscfg = <0x114 0x818 0xe0 0xec>;
65 st,osc-rdy;
78 st,syscfg = <0x118 0x81c 0xe4 0xf0>;
81 st,osc-force-ext;
92 st,syscfg = <0x11c 0x820>;