Lines Matching refs:be

8 - compatible : shall be one of the following:
25 		All at91 specific clocks (clocks defined below) must be child
82 - #size-cells : shall be 0 (reg is used to encode clk id).
83 - #address-cells : shall be 1 (reg is used to encode clk id).
98 - #clock-cells : from common clock binding; shall be set to 0.
112 - #clock-cells : from common clock binding; shall be set to 0.
127 - #clock-cells : from common clock binding; shall be set to 0.
139 - #size-cells : shall be 0 (reg is used to encode clk id).
140 - #address-cells : shall be 1 (reg is used to encode clk id).
141 - interrupts : shall be set to PMC interrupt line.
143 - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
170 - interrupts : shall be set to "<0>".
187 - interrupts : shall be set to "<0>".
188 - #clock-cells : from common clock binding; shall be set to 0.
208 - interrupts : shall be set to "<0>".
209 - #clock-cells : from common clock binding; shall be set to 0.
223 - interrupts : shall be set to "<3>".
224 - #clock-cells : from common clock binding; shall be set to 0.
225 - clocks : shall be the master clock sources (see atmel datasheet) phandles.
247 - #size-cells : shall be 0 (reg is used to encode clk id).
248 - #address-cells : shall be 1 (reg is used to encode clk id).
249 - clocks : shall be the master clock phandle.
252 	* #clock-cells : from common clock binding; shall be set to 0.
282 - interrupts : shall be set to "<1>".
283 - #clock-cells : from common clock binding; shall be set to 0.
284 - clocks : shall be the main clock phandle.
292 				      range description. Sould be set to 2, 3
324 - #clock-cells : from common clock binding; shall be set to 0.
325 - clocks : shall be the plla clock phandle.
327 The pll divisor is equal to 2 and cannot be changed.
338 - #size-cells : shall be 0 (reg is used to encode clk id).
339 - #address-cells : shall be 1 (reg is used to encode clk id).
340 - clocks : shall be the programmable clock source phandles.
343 	* #clock-cells : from common clock binding; shall be set to 0.
346 	* interrupts : shall be set to "<(8 + id)>".
371 - #clock-cells : from common clock binding; shall be set to 0.
372 - clocks : shall be the smd clock source phandles.
383 - #size-cells : shall be 0 (reg is used to encode clk id).
384 - #address-cells : shall be 1 (reg is used to encode clk id).
386 	* #clock-cells : from common clock binding; shall be set to 0.
417 - #clock-cells : from common clock binding; shall be set to 0.
418 - clocks : shall be the smd clock source phandles.
441 - interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
442 - #clock-cells : from common clock binding; shall be set to 0.
443 - clocks : shall be the main clock source phandle.
455 - #clock-cells : from common clock binding; shall be set to 0.
456 - clocks : shall be the master clock source phandle.