Lines Matching refs:proc

285 special files created in the /proc/rd/... hierarchy along with the normal
289 controller is always available for controller N in /proc/rd/cN/initial_status,
291 /proc/rd/cN/current_status.  In addition, status changes are also logged by the
294 is also available in /proc/rd/cN/current_status, and progress messages are
298 available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
337 /proc/rd/status returns "OK" when all DAC960 controllers in the system are
342 /proc/rd/cN/user_command.  A human readable command can be written to this
347   echo "<configuration-command>" > /proc/rd/c0/user_command
348   cat /proc/rd/c0/user_command
423 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
445 gwynedd:/u/lnz# cat /proc/rd/status
448 The above messages indicate that everything is healthy, and /proc/rd/status
466 from /proc/rd also reflects the drive failure.  The status message in
467 /proc/rd/status has changed from "OK" to "ALERT":
469 gwynedd:/u/lnz# cat /proc/rd/status
472 and /proc/rd/c0/current_status has been updated:
474 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
496 gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
497 gwynedd:/u/lnz# cat /proc/rd/c0/user_command
502 operation is then available for reading from /proc/rd/c0/user_command, as well
513 and /proc/rd/c0/current_status is updated:
515 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
529 As the rebuild progresses, the current status in /proc/rd/c0/current_status is
532 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
561 /proc/rd/c0/current_status is updated:
563 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
577 and /proc/rd/status indicates that everything is healthy once again:
579 gwynedd:/u/lnz# cat /proc/rd/status
595 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
617 gwynedd:/u/lnz# cat /proc/rd/status
620 The above messages indicate that everything is healthy, and /proc/rd/status
641 Concurrently with the above, the driver status available from /proc/rd also
643 /proc/rd/status has changed from "OK" to "ALERT":
645 gwynedd:/u/lnz# cat /proc/rd/status
648 and /proc/rd/c0/current_status has been updated:
650 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
664 As the rebuild progresses, the current status in /proc/rd/c0/current_status is
667 gwynedd:/u/lnz# cat /proc/rd/c0/current_status
696 /proc/rd/c0/current_status is updated:
719 and /proc/rd/status indicates that everything is healthy once again:
721 gwynedd:/u/lnz# cat /proc/rd/status
729 gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
730 gwynedd:/u/lnz# cat /proc/rd/c0/user_command
735 available for reading from /proc/rd/c0/user_command, as well as being logged to
742 and /proc/rd/c0/current_status is updated:
744 gwynedd:/u/lnz# cat /proc/rd/c0/current_status