Lines Matching refs:drives

64 of the controller and adding new disk drives, most everything can be handled
68 Each DAC960 parallel SCSI controller can support up to 15 disk drives per
69 channel, for a maximum of 60 drives on a four channel controller; the fibre
70 channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
71 a total of 250 drives.  The drives installed on a controller are divided into
191 Please note that not all SCSI disk drives are suitable for use with DAC960
235 Before installing Linux or adding DAC960 logical drives to an existing Linux
237 drives using the BIOS Configuration Utility or DACCF.  Please note that since
240 drives, each of which can have up to 6 usable partitions.  Also, note that with
275 drives that have been created are available for immediate use even while they
278 drives fail and must be replaced.  Mylex's online monitoring and configuration
281 enclosure, the controller is able to rebuild failed drives automatically as
339 drives are offline or critical or any non-standby physical drives are dead.
372     from status DEAD to status ONLINE.  In cases where multiple physical drives
415 configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
416 DAC960PJ controller.  The physical drives are configured into a single drive
418 logical drives, one RAID-5 and one RAID-6.  Note that these logs are from an
488 Since there are no standby drives configured, the system can continue to access
489 the logical drives in a performance degraded mode until the failed drive is
491 logical drives.  Once Physical Drive 1:1 is replaced with a properly
554 logical and physical drives and the rebuild completion:
587 configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
588 DAC960PJ controller.  The physical drives are configured into a single drive
590 logical drives, one RAID-5 and one RAID-6.  Note that these logs are from an
689 logical and physical drives and the rebuild completion: