[ 0.000000] CPU0 microcode updated early to revision 0x1f, date = 2018-02-07 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-151-generic (buildd@lgw01-amd64-034) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.4) ) #201-Ubuntu SMP Wed May 30 14:22:13 UTC 2018 (Ubuntu 3.13.0-151.201-generic 3.13.11-ckt39) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.13.0-151-generic root=UUID=07dbd6ec-2f10-40b1-bc94-d98b5f82e21f ro console=ttyS0,115200 vga=791 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ce38afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ce38b000-0x00000000ce93bfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce93c000-0x00000000ceb8dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ceb8e000-0x00000000ceb9bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ceb9c000-0x00000000cebbbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cebbc000-0x00000000cebc0fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cebc1000-0x00000000cec03fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cec04000-0x00000000ceffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask C00000000 write-back [ 0.000000] 1 base 400000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 5 base 41F800000 mask FFF800000 uncachable [ 0.000000] 6 base 41F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 16GB, type WB [ 0.000000] reg 1, base: 16GB, range: 512MB, type WB [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 4, base: 3320MB, range: 8MB, type UC [ 0.000000] reg 5, base: 16888MB, range: 8MB, type UC [ 0.000000] reg 6, base: 16886MB, range: 2MB, type UC [ 0.000000] total RAM covered: 16110M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3320MB, range: 8MB, type UC [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB [ 0.000000] reg 5, base: 8GB, range: 8GB, type WB [ 0.000000] reg 6, base: 16GB, range: 512MB, type WB [ 0.000000] reg 7, base: 16886MB, range: 2MB, type UC [ 0.000000] reg 8, base: 16888MB, range: 8MB, type UC [ 0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcd30-0x000fcd3f] mapped at [ffff8800000fcd30] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fee000, 0x01feefff] PGTABLE [ 0.000000] BRK [0x01fef000, 0x01feffff] PGTABLE [ 0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41f400000-0x41f5fffff] [ 0.000000] [mem 0x41f400000-0x41f5fffff] page 2M [ 0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41f3fffff] [ 0.000000] [mem 0x41c000000-0x41f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff] [ 0.000000] [mem 0x400000000-0x41bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE [ 0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xce38afff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xce1fffff] page 2M [ 0.000000] [mem 0xce200000-0xce38afff] page 4k [ 0.000000] init_memory_mapping: [mem 0xcec04000-0xceffffff] [ 0.000000] [mem 0xcec04000-0xcedfffff] page 4k [ 0.000000] [mem 0xcee00000-0xceffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M [ 0.000000] RAMDISK: [mem 0x35980000-0x36cb7fff] [ 0.000000] ACPI: RSDP 00000000000f0450 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 00000000ceb8e078 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000ceb995a0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000ceb8e170 00B42E (v02 ALASKA A M I 00000015 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cebbaf80 000040 [ 0.000000] ACPI: APIC 00000000ceb99698 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 00000000ceb99730 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000ceb99770 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 00000000ceb997a8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 00000000ceb99b18 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 00000000ceb9a4c8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR 00000000ceb9af60 0000B0 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41f5fffff] [ 0.000000] NODE_DATA [mem 0x41f5eb000-0x41f5effff] [ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f000000-ffff88041ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x41f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xce38afff] [ 0.000000] node 0: [mem 0xcec04000-0xceffffff] [ 0.000000] node 0: [mem 0x100000000-0x41f5fffff] [ 0.000000] On node 0 totalpages: 4119330 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13143 pages used for memmap [ 0.000000] DMA32 zone: 841094 pages, LIFO batch:31 [ 0.000000] Normal zone: 51160 pages used for memmap [ 0.000000] Normal zone: 3274240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xce38b000-0xce93bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xce93c000-0xceb8dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xceb8e000-0xceb9bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xceb9c000-0xcebbbfff] [ 0.000000] PM: Registered nosave memory: [mem 0xcebbc000-0xcebc0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcebc1000-0xcec03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xcf7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041f200000 s84032 r8192 d22464 u262144 [ 0.000000] pcpu-alloc: s84032 r8192 d22464 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4054942 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-151-generic root=UUID=07dbd6ec-2f10-40b1-bc94-d98b5f82e21f ro console=ttyS0,115200 vga=791 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16115884K/16477320K available (7488K kernel code, 1163K rwdata, 3436K rodata, 1368K init, 1448K bss, 361436K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 66060288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3411.853 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6823.70 BogoMIPS (lpj=13647412) [ 0.010706] pid_max: default: 32768 minimum: 301 [ 0.015341] Security Framework initialized [ 0.019451] AppArmor: AppArmor initialized [ 0.023553] Yama: becoming mindful. [ 0.027766] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.038039] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.046532] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.053416] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.060892] Initializing cgroup subsys memory [ 0.065254] Initializing cgroup subsys devices [ 0.069695] Initializing cgroup subsys freezer [ 0.074139] Initializing cgroup subsys blkio [ 0.078409] Initializing cgroup subsys perf_event [ 0.083112] Initializing cgroup subsys hugetlb [ 0.087571] CPU: Physical Processor ID: 0 [ 0.091584] CPU: Processor Core ID: 0 [ 0.095250] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.095250] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.108266] FEATURE SPEC_CTRL Present [ 0.112191] mce: CPU supports 9 MCE banks [ 0.116209] CPU0: Thermal monitoring enabled (TM1) [ 0.121005] process: using mwait in idle threads [ 0.125627] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.125627] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.136738] Spectre V2 mitigation: Mitigation: Full generic retpoline [ 0.143173] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported [ 0.150736] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled<6>[ 0.159008] Speculative Store Bypass: Vulnerable [ 0.163740] Freeing SMP alternatives memory: 32K (ffffffff81e7a000 - ffffffff81e82000) [ 0.172510] ACPI: Core revision 20131115 [ 0.180305] ACPI: All ACPI Tables successfully acquired [ 0.194965] ftrace: allocating 28726 entries in 113 pages [ 0.218594] dmar: Host address width 36 [ 0.222434] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.227744] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.235824] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.241136] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.249215] dmar: RMRR base: 0x000000ce8d1000 end: 0x000000ce8dffff [ 0.255477] dmar: RMRR base: 0x000000cf800000 end: 0x000000df9fffff [ 0.261807] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.267372] HPET id 0 under DRHD base 0xfed91000 [ 0.272084] Enabled IRQ remapping in x2apic mode [ 0.276692] Enabling x2apic [ 0.279482] Enabled x2apic [ 0.282193] Switched APIC routing to cluster x2apic. [ 0.287556] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.333215] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09) [ 0.342474] TSC deadline timer enabled [ 0.342480] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.352806] ... version: 3 [ 0.356806] ... bit width: 48 [ 0.360895] ... generic registers: 4 [ 0.364897] ... value mask: 0000ffffffffffff [ 0.370198] ... max period: 0000ffffffffffff [ 0.375498] ... fixed-purpose events: 3 [ 0.379501] ... event mask: 000000070000000f [ 0.385961] x86: Booting SMP configuration: [ 0.404500] CPU1 microcode updated early to revision 0x1f, date = 2018-02-07 [ 0.413962] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.432756] CPU2 microcode updated early to revision 0x1f, date = 2018-02-07 [ 0.452967] CPU3 microcode updated early to revision 0x1f, date = 2018-02-07 [ 0.390141] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.517030] x86: Booted up 1 node, 8 CPUs [ 0.521229] smpboot: Total of 8 processors activated (54589.64 BogoMIPS) [ 0.534385] devtmpfs: initialized [ 0.539821] EVM: security.selinux [ 0.543136] EVM: security.SMACK64 [ 0.546451] EVM: security.ima [ 0.549414] EVM: security.capability [ 0.553009] PM: Registering ACPI NVS region [mem 0xce93c000-0xceb8dfff] (2433024 bytes) [ 0.561017] PM: Registering ACPI NVS region [mem 0xceb9c000-0xcebbbfff] (131072 bytes) [ 0.568924] PM: Registering ACPI NVS region [mem 0xcebc1000-0xcec03fff] (274432 bytes) [ 0.577640] pinctrl core: initialized pinctrl subsystem [ 0.582898] regulator-dummy: no parameters [ 0.587017] RTC time: 15:17:26, date: 05/12/19 [ 0.591473] NET: Registered protocol family 16 [ 0.595982] cpuidle: using governor ladder [ 0.600069] cpuidle: using governor menu [ 0.604004] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.611566] ACPI: bus type PCI registered [ 0.615575] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.622040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.631331] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.642984] PCI: Using configuration type 1 for base access [ 0.649274] bio: create slab at 0 [ 0.653382] ACPI: Added _OSI(Module Device) [ 0.657561] ACPI: Added _OSI(Processor Device) [ 0.662004] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.666707] ACPI: Added _OSI(Processor Aggregator Device) [ 0.674186] ACPI: Executed 1 blocks of module-level executable AML code [ 0.684944] ACPI: SSDT 00000000ce8e9018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.693569] ACPI: Dynamic OEM Table Load: [ 0.697612] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.710005] ACPI: SSDT 00000000ce8eaa98 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.718639] ACPI: Dynamic OEM Table Load: [ 0.722678] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.733889] ACPI: SSDT 00000000ce8ebc18 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.742503] ACPI: Dynamic OEM Table Load: [ 0.746542] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.758612] ACPI: Interpreter enabled [ 0.762281] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.771522] ACPI: (supports S0 S1 S3 S4 S5) [ 0.775699] ACPI: Using IOAPIC for interrupt routing [ 0.780675] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.789891] ACPI: No dock devices found. [ 0.797842] ACPI: Power Resource [FN00] (off) [ 0.802246] ACPI: Power Resource [FN01] (off) [ 0.806647] ACPI: Power Resource [FN02] (off) [ 0.811045] ACPI: Power Resource [FN03] (off) [ 0.815446] ACPI: Power Resource [FN04] (off) [ 0.820230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.826403] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.834642] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.841918] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.848522] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.857078] PCI host bridge to bus 0000:00 [ 0.861170] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.866652] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.872826] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.878994] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.885855] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.892714] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.899576] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.906437] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.913305] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.920164] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.927025] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.933890] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.933951] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.933975] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.934002] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.939676] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.939685] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit] [ 0.939690] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.939693] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.939767] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.939788] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0b000-0xf7c0b00f 64bit] [ 0.939859] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.939919] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.939938] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff] [ 0.940022] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.940065] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.945741] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.945755] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit] [ 0.945817] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.945849] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.951526] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.951598] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.951634] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.957303] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.957375] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.957409] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.963079] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400 [ 0.963152] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.963186] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.968859] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.968932] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.968966] pci 0000:00:1c.6: System wakeup disabled by ACPI [ 0.974635] pci 0000:00:1c.7: [8086:244e] type 01 class 0x060401 [ 0.974708] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.974742] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 0.980415] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.980435] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff] [ 0.980519] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.980560] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.986237] pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100 [ 0.986382] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.986399] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] [ 0.986405] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] [ 0.986412] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] [ 0.986419] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] [ 0.986426] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.986433] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff] [ 0.986474] pci 0000:00:1f.2: PME# supported from D3hot [ 0.986519] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.986533] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit] [ 0.986552] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.986629] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.991668] pci 0000:02:00.0: [1095:3132] type 00 class 0x018000 [ 0.991698] pci 0000:02:00.0: reg 0x10: [mem 0xf7b84000-0xf7b8407f 64bit] [ 0.991722] pci 0000:02:00.0: reg 0x18: [mem 0xf7b80000-0xf7b83fff 64bit] [ 0.991737] pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe07f] [ 0.991767] pci 0000:02:00.0: reg 0x30: [mem 0xf7b00000-0xf7b7ffff pref] [ 0.991842] pci 0000:02:00.0: supports D1 D2 [ 0.991867] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.005539] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.010502] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 1.010506] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 1.010590] pci 0000:03:00.0: [1106:0415] type 00 class 0x010185 [ 1.010609] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047] [ 1.010623] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033] [ 1.010637] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027] [ 1.010650] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013] [ 1.010664] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f] [ 1.010690] pci 0000:03:00.0: reg 0x30: [mem 0xf7a00000-0xf7a0ffff pref] [ 1.010757] pci 0000:03:00.0: supports D1 D2 [ 1.010758] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 1.018519] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.023479] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 1.023483] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff] [ 1.023566] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330 [ 1.023593] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf7907fff 64bit] [ 1.023736] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 1.023766] pci 0000:04:00.0: System wakeup disabled by ACPI [ 1.037436] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 1.042397] pci 0000:00:1c.5: bridge window [mem 0xf7900000-0xf79fffff] [ 1.042475] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 1.042493] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 1.042526] pci 0000:05:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 1.042547] pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 1.042634] pci 0000:05:00.0: supports D1 D2 [ 1.042635] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.042669] pci 0000:05:00.0: System wakeup disabled by ACPI [ 1.056339] pci 0000:00:1c.6: PCI bridge to [bus 05] [ 1.061305] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] [ 1.061312] pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.061378] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401 [ 1.061491] pci 0000:06:00.0: System wakeup disabled by ACPI [ 1.067157] pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode) [ 1.074195] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff] [ 1.074198] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff] [ 1.074203] pci 0000:00:1c.7: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.074205] pci 0000:00:1c.7: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.074206] pci 0000:00:1c.7: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.074208] pci 0000:00:1c.7: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 1.074209] pci 0000:00:1c.7: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 1.074211] pci 0000:00:1c.7: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 1.074212] pci 0000:00:1c.7: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 1.074214] pci 0000:00:1c.7: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 1.074215] pci 0000:00:1c.7: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 1.074217] pci 0000:00:1c.7: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode) [ 1.074272] pci 0000:07:00.0: [1de1:0391] type 00 class 0x010000 [ 1.074302] pci 0000:07:00.0: reg 0x10: [io 0xb100-0xb1ff] [ 1.074319] pci 0000:07:00.0: reg 0x14: [mem 0xf7831000-0xf7831fff] [ 1.074397] pci 0000:07:00.0: reg 0x30: [mem 0xf7820000-0xf782ffff pref] [ 1.074483] pci 0000:07:01.0: [106c:8169] type 00 class 0x020000 [ 1.074513] pci 0000:07:01.0: reg 0x10: [io 0xb000-0xb0ff] [ 1.074529] pci 0000:07:01.0: reg 0x14: [mem 0xf7830000-0xf78300ff] [ 1.074607] pci 0000:07:01.0: reg 0x30: [mem 0xf7800000-0xf781ffff pref] [ 1.074743] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode) [ 1.081528] pci 0000:06:00.0: bridge window [io 0xb000-0xbfff] [ 1.081533] pci 0000:06:00.0: bridge window [mem 0xf7800000-0xf78fffff] [ 1.081542] pci 0000:06:00.0: bridge window [io 0xb000-0xbfff] (subtractive decode) [ 1.081544] pci 0000:06:00.0: bridge window [mem 0xf7800000-0xf78fffff] (subtractive decode) [ 1.081545] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 1.081547] pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 1.081549] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.081551] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.081552] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.081554] pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 1.081555] pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 1.081556] pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 1.081558] pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 1.081559] pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 1.081561] pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 1.081562] pci 0000:06:00.0: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode) [ 1.082014] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 10 *11 12 14 15) [ 1.088922] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 10 *11 12 14 15) [ 1.095814] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 1.100945] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 11 12 14 *15) [ 1.107841] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 10 11 12 14 15) *0, disabled. [ 1.115894] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *10 11 12 14 15) [ 1.122789] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11 12 *14 15) [ 1.129684] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 10 11 12 14 15) [ 1.136708] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.141532] ACPI: \_SB_.PCI0: notify handler is installed [ 1.141568] Found 1 acpi root devices [ 1.141629] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.147280] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.155357] vgaarb: loaded [ 1.158065] vgaarb: bridge control possible 0000:00:02.0 [ 1.163466] SCSI subsystem initialized [ 1.167240] libata version 3.00 loaded. [ 1.167254] ACPI: bus type USB registered [ 1.171267] usbcore: registered new interface driver usbfs [ 1.176755] usbcore: registered new interface driver hub [ 1.182080] usbcore: registered new device driver usb [ 1.187193] PCI: Using ACPI for IRQ routing [ 1.192699] PCI: pci_cache_line_size set to 64 bytes [ 1.192760] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 1.192761] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 1.192763] e820: reserve RAM buffer [mem 0xce38b000-0xcfffffff] [ 1.192764] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff] [ 1.192765] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff] [ 1.192815] NetLabel: Initializing [ 1.196213] NetLabel: domain hash size = 128 [ 1.200560] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.205525] NetLabel: unlabeled traffic allowed by default [ 1.211116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.217443] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.225283] Switched to clocksource hpet [ 1.232063] AppArmor: AppArmor Filesystem Enabled [ 1.236776] pnp: PnP ACPI init [ 1.239834] ACPI: bus type PNP registered [ 1.243886] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 1.250493] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.250502] pnp 00:01: [dma 4] [ 1.250512] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.250524] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.250582] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.250610] system 00:04: [io 0x0680-0x069f] has been reserved [ 1.256523] system 00:04: [io 0x0200-0x020f] has been reserved [ 1.262438] system 00:04: [io 0xffff] has been reserved [ 1.267746] system 00:04: [io 0xffff] has been reserved [ 1.273057] system 00:04: [io 0x0400-0x0453] could not be reserved [ 1.279320] system 00:04: [io 0x0458-0x047f] has been reserved [ 1.285235] system 00:04: [io 0x0500-0x057f] has been reserved [ 1.291152] system 00:04: [io 0x164e-0x164f] has been reserved [ 1.297068] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.297090] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.297121] system 00:06: [io 0x0454-0x0457] has been reserved [ 1.303038] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.303090] system 00:07: [io 0x0290-0x029f] has been reserved [ 1.309006] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.309172] pnp 00:08: [dma 0 disabled] [ 1.309235] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.309274] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 1.315188] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.315209] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.315346] pnp 00:0b: [dma 0 disabled] [ 1.315376] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.315541] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.322153] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.328762] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.335371] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.341980] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.348588] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.355199] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.362154] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.368762] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 1.375373] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.382327] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 1.388936] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.389039] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved [ 1.395651] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved [ 1.402259] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.402273] pnp: PnP ACPI: found 14 devices [ 1.406458] ACPI: bus type PNP unregistered [ 1.416284] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.421249] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 1.426210] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 1.432301] pci 0000:00:1c.0: bridge window [mem 0xf7b00000-0xf7bfffff] [ 1.439086] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 1.444043] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 1.450137] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff] [ 1.456921] pci 0000:00:1c.5: PCI bridge to [bus 04] [ 1.461880] pci 0000:00:1c.5: bridge window [mem 0xf7900000-0xf79fffff] [ 1.468666] pci 0000:00:1c.6: PCI bridge to [bus 05] [ 1.473624] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff] [ 1.479717] pci 0000:00:1c.6: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.487454] pci 0000:06:00.0: PCI bridge to [bus 07] [ 1.492412] pci 0000:06:00.0: bridge window [io 0xb000-0xbfff] [ 1.498507] pci 0000:06:00.0: bridge window [mem 0xf7800000-0xf78fffff] [ 1.505295] pci 0000:00:1c.7: PCI bridge to [bus 06-07] [ 1.510516] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff] [ 1.516606] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff] [ 1.523395] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.523396] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.523398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.523399] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 1.523401] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 1.523402] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 1.523404] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 1.523405] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 1.523407] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 1.523408] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 1.523410] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 1.523412] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff] [ 1.523413] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.523415] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff] [ 1.523416] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff] [ 1.523418] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 1.523419] pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 1.523421] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff] [ 1.523422] pci_bus 0000:06: resource 1 [mem 0xf7800000-0xf78fffff] [ 1.523424] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] [ 1.523425] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] [ 1.523427] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] [ 1.523428] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff] [ 1.523429] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff] [ 1.523431] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff] [ 1.523432] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff] [ 1.523434] pci_bus 0000:06: resource 11 [mem 0x000e0000-0x000e3fff] [ 1.523435] pci_bus 0000:06: resource 12 [mem 0x000e4000-0x000e7fff] [ 1.523437] pci_bus 0000:06: resource 13 [mem 0xdfa00000-0xfeafffff] [ 1.523438] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] [ 1.523440] pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff] [ 1.523441] pci_bus 0000:07: resource 4 [io 0xb000-0xbfff] [ 1.523443] pci_bus 0000:07: resource 5 [mem 0xf7800000-0xf78fffff] [ 1.523444] pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7] [ 1.523446] pci_bus 0000:07: resource 9 [io 0x0d00-0xffff] [ 1.523447] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff] [ 1.523449] pci_bus 0000:07: resource 11 [mem 0x000d0000-0x000d3fff] [ 1.523450] pci_bus 0000:07: resource 12 [mem 0x000d4000-0x000d7fff] [ 1.523452] pci_bus 0000:07: resource 13 [mem 0x000d8000-0x000dbfff] [ 1.523453] pci_bus 0000:07: resource 14 [mem 0x000dc000-0x000dffff] [ 1.523455] pci_bus 0000:07: resource 15 [mem 0x000e0000-0x000e3fff] [ 1.523456] pci_bus 0000:07: resource 16 [mem 0x000e4000-0x000e7fff] [ 1.523458] pci_bus 0000:07: resource 17 [mem 0xdfa00000-0xfeafffff] [ 1.523477] NET: Registered protocol family 2 [ 1.527982] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.535528] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.542313] TCP: Hash tables configured (established 131072 bind 65536) [ 1.548933] TCP: reno registered [ 1.552174] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.558296] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.564874] NET: Registered protocol family 1 [ 1.569234] pci 0000:00:02.0: Video device with shadowed ROM [ 1.825166] PCI: CLS 64 bytes, default 64 [ 1.825202] Trying to unpack rootfs image as initramfs... [ 2.041671] Freeing initrd memory: 19680K (ffff880035980000 - ffff880036cb8000) [ 2.049005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.055442] software IO TLB [mem 0xca38b000-0xce38b000] (64MB) mapped at [ffff8800ca38b000-ffff8800ce38afff] [ 2.065476] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1f [ 2.071309] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1f [ 2.077146] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1f [ 2.082977] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1f [ 2.088806] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1f [ 2.094634] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1f [ 2.100464] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1f [ 2.106293] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1f [ 2.112156] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.120934] Scanning for low memory corruption every 60 seconds [ 2.127028] Initialise system trusted keyring [ 2.131413] audit: initializing netlink socket (disabled) [ 2.136816] type=2000 audit(1557674245.960:1): initialized [ 2.160824] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.167938] zbud: loaded [ 2.170655] VFS: Disk quotas dquot_6.5.2 [ 2.174598] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.181271] fuse init (API version 7.22) [ 2.185237] msgmni has been set to 31514 [ 2.189194] Key type big_key registered [ 2.193329] Key type asymmetric registered [ 2.197428] Asymmetric key parser 'x509' registered [ 2.202319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.209744] io scheduler noop registered [ 2.213667] io scheduler deadline registered (default) [ 2.218818] io scheduler cfq registered [ 2.222782] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X [ 2.223087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.228661] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.235295] vesafb: mode is 1024x768x16, linelength=2048, pages=0 [ 2.241387] vesafb: scrolling: redraw [ 2.245051] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 2.255559] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 1536k, total 1536k [ 2.265493] Console: switching to colour frame buffer device 128x48 [ 2.272420] fb0: VESA VGA frame buffer device [ 2.276797] intel_idle: MWAIT substates: 0x1120 [ 2.276798] intel_idle: v0.4 model 0x3A [ 2.276799] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.276907] ipmi message handler version 39.2 [ 2.281323] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.289489] ACPI: Power Button [PWRB] [ 2.293170] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.300558] ACPI: Power Button [PWRF] [ 2.304263] ACPI: Fan [FAN0] (off) [ 2.307685] ACPI: Fan [FAN1] (off) [ 2.311107] ACPI: Fan [FAN2] (off) [ 2.314525] ACPI: Fan [FAN3] (off) [ 2.317937] ACPI: Fan [FAN4] (off) [ 2.324907] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.330563] ACPI: Thermal Zone [TZ00] (28 C) [ 2.334972] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.340627] ACPI: Thermal Zone [TZ01] (30 C) [ 2.344910] GHES: HEST is not enabled! [ 2.348713] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.375472] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.383684] Linux agpgart interface v0.103 [ 2.388558] brd: module loaded [ 2.392013] loop: module loaded [ 2.395377] libphy: Fixed MDIO Bus: probed [ 2.399524] tun: Universal TUN/TAP device driver, 1.6 [ 2.404568] tun: (C) 1999-2004 Max Krasnyansky [ 2.410771] PPP generic driver version 2.4.2 [ 2.415070] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.421590] ehci-pci: EHCI PCI platform driver [ 2.426105] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.431330] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.438726] ehci-pci 0000:00:1a.0: debug port 2 [ 2.447159] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 2.447174] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c08000 [ 2.464626] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.464671] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.464673] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.464674] usb usb1: Product: EHCI Host Controller [ 2.464675] usb usb1: Manufacturer: Linux 3.13.0-151-generic ehci_hcd [ 2.464675] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.464747] hub 1-0:1.0: USB hub found [ 2.464751] hub 1-0:1.0: 2 ports detected [ 2.464891] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.464893] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.464910] ehci-pci 0000:00:1d.0: debug port 2 [ 2.468818] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 2.468823] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000 [ 2.476624] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.476644] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.476645] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.476646] usb usb2: Product: EHCI Host Controller [ 2.476647] usb usb2: Manufacturer: Linux 3.13.0-151-generic ehci_hcd [ 2.476648] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.476707] hub 2-0:1.0: USB hub found [ 2.476711] hub 2-0:1.0: 2 ports detected [ 2.476777] ehci-platform: EHCI generic platform driver [ 2.476782] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.476782] ohci-pci: OHCI PCI platform driver [ 2.476787] ohci-platform: OHCI generic platform driver [ 2.476790] uhci_hcd: USB Universal Host Controller Interface driver [ 2.476847] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.476849] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 2.483902] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 2.483906] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 2.483911] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 2.483916] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 2.483921] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 2.483926] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 2.483931] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X [ 2.483936] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X [ 2.484091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.484092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.484093] usb usb3: Product: xHCI Host Controller [ 2.484094] usb usb3: Manufacturer: Linux 3.13.0-151-generic xhci_hcd [ 2.484095] usb usb3: SerialNumber: 0000:04:00.0 [ 2.484155] hub 3-0:1.0: USB hub found [ 2.484164] hub 3-0:1.0: 2 ports detected [ 2.484214] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.484215] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 2.489067] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.489068] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.489069] usb usb4: Product: xHCI Host Controller [ 2.489069] usb usb4: Manufacturer: Linux 3.13.0-151-generic xhci_hcd [ 2.489070] usb usb4: SerialNumber: 0000:04:00.0 [ 2.489126] hub 4-0:1.0: USB hub found [ 2.489134] hub 4-0:1.0: 2 ports detected [ 2.704595] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 2.714126] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.719094] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.724369] mousedev: PS/2 mouse device common for all mice [ 2.730295] rtc_cmos 00:05: RTC can wake from S4 [ 2.735105] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.741224] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.748914] device-mapper: uevent: version 1.0.3 [ 2.754044] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 2.762479] ledtrig-cpu: registered to indicate activity on CPUs [ 2.768609] TCP: cubic registered [ 2.771962] NET: Registered protocol family 10 [ 2.776494] NET: Registered protocol family 17 [ 2.780465] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.787505] Key type dns_resolver registered [ 2.792053] Loading compiled-in X.509 certificates [ 2.797440] Loaded X.509 cert 'Magrathea: Glacier signing key: 70341c88d698ed60ab45c266f343de534c16a015' [ 2.806924] registered taskstats version 1 [ 2.813452] Key type trusted registered [ 2.821274] Key type encrypted registered [ 2.825293] AppArmor: AppArmor sha1 policy hashing enabled [ 2.830771] IMA: No TPM chip found, activating TPM-bypass! [ 2.836609] regulator-dummy: disabling [ 2.840549] Magic number: 3:206:285 [ 2.844234] acpi PNP0C04:00: hash matches [ 2.848341] rtc_cmos 00:05: setting system clock to 2019-05-12 15:17:28 UTC (1557674248) [ 2.857503] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.863505] EDD information not available. [ 2.867625] PM: Hibernation image not present or could not be loaded. [ 2.868258] Freeing unused kernel memory: 1368K (ffffffff81d24000 - ffffffff81e7a000) [ 2.876074] Write protecting the kernel read-only data: 12288k [ 2.882236] Freeing unused kernel memory: 688K (ffff880001754000 - ffff880001800000) [ 2.890853] Freeing unused kernel memory: 660K (ffff880001b5b000 - ffff880001c00000) [ 2.907704] systemd-udevd[146]: starting version 204 [ 2.912752] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.919532] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.926784] sata_sil24 0000:02:00.0: version 1.1 [ 2.926786] pata_via 0000:03:00.0: version 0.3.4 [ 2.927269] scsi1 : pata_via [ 2.931015] dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 [ 2.931268] hub 1-1:1.0: USB hub found [ 2.931364] hub 1-1:1.0: 6 ports detected [ 2.931766] scsi2 : pata_via [ 2.931793] ata1: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16 [ 2.931793] ata2: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16 [ 2.944384] scsi0 : sata_sil24 [ 2.944445] scsi3 : sata_sil24 [ 2.944473] ata3: SATA max UDMA/100 host m128@0xf7b84000 port 0xf7b80000 irq 16 [ 2.944476] ata4: SATA max UDMA/100 host m128@0xf7b84000 port 0xf7b82000 irq 16 [ 2.985913] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.993330] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.003005] r8169 0000:05:00.0: irq 51 for MSI/MSI-X [ 3.003143] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc900018b8000, 00:0b:0e:0f:00:ed, XID 0c200000 IRQ 51 [ 3.015296] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.026142] ahci 0000:00:1f.2: version 3.0 [ 3.026266] ahci 0000:00:1f.2: irq 52 for MSI/MSI-X [ 3.026448] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.036254] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 3.048380] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.064361] tsc: Refined TSC clocksource calibration: 3411.474 MHz [ 3.080698] scsi5 : ahci [ 3.083646] scsi6 : ahci [ 3.086528] scsi7 : ahci [ 3.089430] scsi8 : ahci [ 3.092322] scsi9 : ahci [ 3.095179] scsi10 : ahci [ 3.098079] ata5: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 52 [ 3.106138] ata6: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06180 irq 52 [ 3.114209] ata7: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 52 [ 3.122299] ata8: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06280 irq 52 [ 3.130381] ata9: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06300 irq 52 [ 3.138436] ata10: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06380 irq 52 [ 3.188607] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 3.195851] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.203890] hub 2-1:1.0: USB hub found [ 3.208093] hub 2-1:1.0: 8 ports detected [ 3.251182] dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x57 [ 3.258587] dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s [ 3.265631] dc395x: Connectors: Termination: Auto Low High [ 3.271408] dc395x: Performing initial SCSI bus reset [ 3.276982] scsi4 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 [ 3.326773] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 3.348605] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [ 3.358212] usb 4-2: New USB device found, idVendor=174c, idProduct=55aa [ 3.364906] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.372042] usb 4-2: Product: ASMT1053 [ 3.375793] usb 4-2: Manufacturer: asmedia [ 3.379890] usb 4-2: SerialNumber: 123456789012 [ 3.387883] usb-storage 4-2:1.0: USB Mass Storage device detected [ 3.394109] usb-storage 4-2:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 3.401211] scsi11 : usb-storage 4-2:1.0 [ 3.405166] usbcore: registered new interface driver usb-storage [ 3.456114] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 3.464136] ata10: SATA link down (SStatus 0 SControl 300) [ 3.469646] ata6: SATA link down (SStatus 0 SControl 300) [ 3.475060] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.481247] ata9: SATA link down (SStatus 0 SControl 300) [ 3.486655] ata5: SATA link down (SStatus 0 SControl 300) [ 3.492095] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 3.500507] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409133ac8), AE_NOT_FOUND (20131115/psparse-536) [ 3.513349] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.519610] ata8.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 3.526312] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.533553] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 3.541955] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880409133a50), AE_NOT_FOUND (20131115/psparse-536) [ 3.555003] ata7.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133 [ 3.557772] usb 1-1.2: New USB device found, idVendor=045e, idProduct=076c [ 3.557773] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.557775] usb 1-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae Comfort Mouse 4500 [ 3.557775] usb 1-1.2: Manufacturer: Microsoft [ 3.586255] ata7.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.593517] hidraw: raw HID events driver (C) Jiri Kosina [ 3.593520] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 3.593523] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409133ac8), AE_NOT_FOUND (20131115/psparse-536) [ 3.593686] ata8.00: configured for UDMA/133 [ 3.593956] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359) [ 3.593959] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880409133a50), AE_NOT_FOUND (20131115/psparse-536) [ 3.594098] ata7.00: configured for UDMA/133 [ 3.627998] usb 2-1.3: new full-speed USB device number 3 using ehci-pci [ 3.666976] usbcore: registered new interface driver usbhid [ 3.672560] usbhid: USB HID core driver [ 3.677615] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 [ 3.689684] microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Comfort Mouse 4500] on usb-0000:00:1a.0-1.2/input0 [ 3.720760] usb 2-1.3: New USB device found, idVendor=0557, idProduct=2008 [ 3.727637] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.803926] usb 2-1.4: new low-speed USB device number 4 using ehci-pci [ 3.911779] usb 2-1.4: New USB device found, idVendor=04d9, idProduct=1400 [ 3.918651] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.945897] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input6 [ 3.955602] hid-generic 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1d.0-1.4/input0 [ 3.967325] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input7 [ 3.977052] hid-generic 0003:04D9:1400.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1d.0-1.4/input1 [ 4.067846] Switched to clocksource tsc [ 4.403953] scsi 11:0:0:0: Direct-Access WDC WD20 EARS-00S8B1 0 PQ: 0 ANSI: 6 [ 5.023358] ata3: SATA link down (SStatus 0 SControl 0) [ 7.433961] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 7.440781] ata4.00: ATA-10: WDC WD10J31X-00U3VT0, 01.01A01, max UDMA/133 [ 7.447568] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.455219] ata4.00: configured for UDMA/100 [ 7.459523] scsi: waiting for bus probes to complete ... [ 8.019302] sd 11:0:0:0: Attached scsi generic sg0 type 0 [ 8.019606] sd 11:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8.020137] sd 11:0:0:0: [sda] Write Protect is off [ 8.020139] sd 11:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 8.020695] sd 11:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.022394] sda: sda1 [ 8.024156] sd 11:0:0:0: [sda] Attached SCSI disk [ 8.053790] scsi 3:0:0:0: Direct-Access ATA WDC WD10J31X-00U 01.0 PQ: 0 ANSI: 5 [ 8.061979] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 8.062013] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 8.062241] scsi 7:0:0:0: Direct-Access ATA WDC WD40EZRZ-00G 80.0 PQ: 0 ANSI: 5 [ 8.062340] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 8.062356] sd 7:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 8.062357] sd 7:0:0:0: [sdc] 4096-byte physical blocks [ 8.062440] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 8.062458] sd 7:0:0:0: [sdc] Write Protect is off [ 8.062460] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 8.062485] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.062504] sd 8:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8.062505] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 8.062564] sd 8:0:0:0: [sdd] Write Protect is off [ 8.062565] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 8.062577] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 8.062581] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.110472] sdc: sdc1 sdc2 sdc3 sdc4 [ 8.110872] sd 7:0:0:0: [sdc] Attached SCSI disk [ 8.163513] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 8.168755] sd 3:0:0:0: [sdb] Write Protect is off [ 8.173543] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.173551] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.480417] sdd: sdd1 [ 8.483121] sd 8:0:0:0: [sdd] Attached SCSI disk [ 10.572676] sdb: sdb1 sdb2 sdb3 [ 10.576200] sd 3:0:0:0: [sdb] Attached SCSI disk [ 10.642646] random: nonblocking pool is initialized [ 15.810797] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null) [ 24.150638] Adding 63999996k swap on /dev/sdc3. Priority:-1 extents:1 across:63999996k FS [ 24.290969] systemd-udevd[397]: starting version 204 [ 24.404125] lp: driver loaded but no devices found [ 24.408873] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 24.408877] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \_GPE.HWRE 1 (20131115/utaddress-251) [ 24.408881] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.412389] wmi: Mapper loaded [ 24.414107] ppdev: user-space parallel port driver [ 24.417177] parport_pc 00:08: reported by Plug and Play ACPI [ 24.417225] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 24.421014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.424843] mei_me 0000:00:16.0: irq 53 for MSI/MSI-X [ 24.428246] [drm] Initialized drm 1.1.0 20060810 [ 24.429862] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 24.429867] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.429869] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 24.429872] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20131115/utaddress-251) [ 24.429875] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.429876] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 24.429879] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20131115/utaddress-251) [ 24.429882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.429883] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 24.429886] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20131115/utaddress-251) [ 24.429889] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_GPE.GPIO 3 (20131115/utaddress-251) [ 24.429892] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.429893] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 24.441167] [drm] Memory usable by graphics device = 2048M [ 24.441171] checking generic (e0000000 180000) vs hw (e0000000 10000000) [ 24.441172] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 24.441185] Console: switching to colour dummy device 80x25 [ 24.488655] i915 0000:00:02.0: irq 54 for MSI/MSI-X [ 24.488664] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 24.488665] [drm] Driver supports precise vblank timestamp query. [ 24.488717] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 24.500617] intel_rapl: RAPL package 0 domain package locked by BIOS [ 24.508801] [drm] Wrong MCH_SSKPD value: 0x20100406 [ 24.508804] [drm] This can cause pipe underruns and display issues. [ 24.508805] [drm] Please upgrade your BIOS to fix this. [ 24.512727] lp0: using parport0 (interrupt-driven). [ 24.523706] asus_wmi: ASUS WMI generic driver loaded [ 24.524618] asus_wmi: Initialization: 0x0 [ 24.524639] asus_wmi: BIOS WMI version: 0.9 [ 24.524678] asus_wmi: SFUN value: 0x0 [ 24.524936] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8 [ 24.525536] asus_wmi: Backlight controlled by ACPI video driver [ 24.525909] i915 0000:00:02.0: No connectors reported connected with modes [ 24.525934] [drm] Cannot find any crtc or sizes - going 1024x768 [ 24.526638] fbcon: inteldrmfb (fb0) is primary device [ 24.573047] Console: switching to colour frame buffer device 128x48 [ 24.574140] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 24.574142] i915 0000:00:02.0: registered panic notifier [ 24.594219] type=1400 audit(1557674270.255:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=580 comm="apparmor_parser" [ 24.594224] type=1400 audit(1557674270.255:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=580 comm="apparmor_parser" [ 24.594227] type=1400 audit(1557674270.255:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=580 comm="apparmor_parser" [ 24.596732] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 24.596843] acpi device:3d: registered as cooling_device14 [ 24.596908] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 [ 24.596982] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 24.597113] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X [ 24.601820] type=1400 audit(1557674270.263:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=585 comm="apparmor_parser" [ 24.601826] type=1400 audit(1557674270.263:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=585 comm="apparmor_parser" [ 24.601830] type=1400 audit(1557674270.263:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=585 comm="apparmor_parser" [ 24.608401] SKU: Nid=0x1d sku_cfg=0x4005e601 [ 24.608402] SKU: port_connectivity=0x1 [ 24.608403] SKU: enable_pcbeep=0x0 [ 24.608404] SKU: check_sum=0x00000005 [ 24.608405] SKU: customization=0x000000e6 [ 24.608406] SKU: external_amp=0x0 [ 24.608406] SKU: platform_type=0x0 [ 24.608407] SKU: swap=0x0 [ 24.608408] SKU: override=0x1 [ 24.608858] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 24.608860] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 24.608861] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 24.608861] mono: mono_out=0x0 [ 24.608862] dig-out=0x11/0x1e [ 24.608863] inputs: [ 24.608864] Front Mic=0x19 [ 24.608865] Rear Mic=0x18 [ 24.608866] Line=0x1a [ 24.608867] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d [ 24.608868] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892 [ 24.623274] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 24.623332] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 24.623380] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 24.623424] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 24.623467] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 24.623512] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 24.623561] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 24.623605] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 24.623648] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 24.625527] type=1400 audit(1557674270.287:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=608 comm="apparmor_parser" [ 24.625606] type=1400 audit(1557674270.287:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=607 comm="apparmor_parser" [ 25.047417] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 25.065900] usbcore: registered new interface driver usbserial [ 25.065911] usbcore: registered new interface driver usbserial_generic [ 25.065917] usbserial: USB Serial support registered for generic [ 25.066810] usbcore: registered new interface driver pl2303 [ 25.066820] usbserial: USB Serial support registered for pl2303 [ 25.066835] pl2303 2-1.3:1.0: pl2303 converter detected [ 25.068343] usb 2-1.3: pl2303 converter now attached to ttyUSB0 [ 25.097793] EXT4-fs (sdc4): re-mounted. Opts: errors=remount-ro [ 25.551019] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 25.579841] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 25.611207] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 25.870587] FS-Cache: Loaded [ 25.876767] RPC: Registered named UNIX socket transport module. [ 25.876770] RPC: Registered udp transport module. [ 25.876771] RPC: Registered tcp transport module. [ 25.876772] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.882851] FS-Cache: Netfs 'nfs' registered for caching [ 25.889338] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 25.911346] init: failsafe main process (991) killed by TERM signal [ 25.948189] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 26.162201] type=1400 audit(1557674271.823:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1146 comm="apparmor_parser" [ 26.162207] type=1400 audit(1557674271.823:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1146 comm="apparmor_parser" [ 26.191877] Bluetooth: Core ver 2.17 [ 26.191889] NET: Registered protocol family 31 [ 26.191890] Bluetooth: HCI device and connection manager initialized [ 26.191895] Bluetooth: HCI socket layer initialized [ 26.191896] Bluetooth: L2CAP socket layer initialized [ 26.191898] Bluetooth: SCO socket layer initialized [ 26.194102] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 26.194104] Bluetooth: BNEP filters: protocol multicast [ 26.194108] Bluetooth: BNEP socket layer initialized [ 26.194124] Bluetooth: RFCOMM TTY layer initialized [ 26.194129] Bluetooth: RFCOMM socket layer initialized [ 26.194132] Bluetooth: RFCOMM ver 1.11 [ 26.373808] init: cups main process (1147) killed by HUP signal [ 26.373816] init: cups main process ended, respawning [ 27.550705] r8169 0000:05:00.0 eth0: link down [ 27.550720] r8169 0000:05:00.0 eth0: link down [ 27.550731] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.666919] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory [ 27.723435] init: gdm main process (1400) killed by TERM signal [ 28.087433] init: samba-ad-dc main process (1307) terminated with status 1 [ 28.346198] init: plymouth-upstart-bridge main process ended, respawning [ 29.314844] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 29.318711] vboxdrv: Found 8 processor cores. [ 29.318932] vboxdrv: fAsync=0 offMin=0x22c offMax=0x2045 [ 29.318989] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 29.318990] vboxdrv: Successfully loaded version 4.3.36_Ubuntu (interface 0x001a000b). [ 29.329095] vboxpci: IOMMU not found (not registered) [ 29.503751] cgroup: systemd-logind (1271) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 29.503753] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 29.678742] r8169 0000:05:00.0 eth0: link up [ 29.678755] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.168408] Ebtables v2.0 registered [ 30.311832] ip_tables: (C) 2000-2006 Netfilter Core Team [ 30.316911] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 32.481198] Bridge firewalling registered [ 32.572443] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 32.589229] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 34.637965] init: plymouth-stop pre-start process (2730) terminated with status 1 [ 56.201025] audit_printk_skb: 72 callbacks suppressed [ 56.201028] type=1400 audit(1557674301.879:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2930 comm="apparmor_parser" [ 56.201032] type=1400 audit(1557674301.879:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2930 comm="apparmor_parser" [ 653.307308] type=1400 audit(1557674899.298:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3412 comm="apparmor_parser" [ 653.307315] type=1400 audit(1557674899.298:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3412 comm="apparmor_parser" [ 3021.663494] ata4.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x0 [ 3021.670200] ata4.00: irq_stat 0x00020002, device error via SDB FIS [ 3021.676380] ata4.00: failed command: WRITE FPDMA QUEUED [ 3021.681604] ata4.00: cmd 61/08:70:a8:6d:70/00:00:74:00:00/40 tag 14 ncq 4096 out [ 3021.681604] res 61/04:00:00:00:00/00:00:00:00:00/40 Emask 0x401 (device error) [ 3021.697306] ata4.00: status: { DRDY DF ERR } [ 3021.701584] ata4.00: error: { ABRT } [ 3021.708320] ata4.00: configured for UDMA/100 [ 3021.708331] ata4: EH complete [ 3022.016723] ata4.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x0 [ 3022.023426] ata4.00: irq_stat 0x00060002, device error via SDB FIS [ 3022.029605] ata4.00: failed command: WRITE FPDMA QUEUED [ 3022.034830] ata4.00: cmd 61/08:78:a8:6d:70/00:00:74:00:00/40 tag 15 ncq 4096 out [ 3022.034830] res 61/04:00:00:00:00/00:00:00:00:00/40 Emask 0x401 (device error) [ 3022.050531] ata4.00: status: { DRDY DF ERR } [ 3022.054801] ata4.00: error: { ABRT } [ 3022.060165] ata4.00: configured for UDMA/100 [ 3022.060177] ata4: EH complete [ 3022.359667] ata4.00: exception Emask 0x0 SAct 0x10000 SErr 0x0 action 0x0 [ 3022.366457] ata4.00: irq_stat 0x00060002, device error via SDB FIS [ 3022.372638] ata4.00: failed command: WRITE FPDMA QUEUED [ 3022.377860] ata4.00: cmd 61/08:80:a8:6d:70/00:00:74:00:00/40 tag 16 ncq 4096 out [ 3022.377860] res 61/04:00:00:00:00/00:00:00:00:00/40 Emask 0x401 (device error) [ 3022.393562] ata4.00: status: { DRDY DF ERR } [ 3022.397832] ata4.00: error: { ABRT } [ 3022.403119] ata4.00: configured for UDMA/100 [ 3022.403132] ata4: EH complete [ 3022.702753] ata4.00: NCQ disabled due to excessive errors [ 3022.702760] ata4.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0 [ 3022.709548] ata4.00: irq_stat 0x00060002, device error via SDB FIS [ 3022.715720] ata4.00: failed command: WRITE FPDMA QUEUED [ 3022.720945] ata4.00: cmd 61/08:88:a8:6d:70/00:00:74:00:00/40 tag 17 ncq 4096 out [ 3022.720945] res 61/04:00:00:00:00/00:00:00:00:00/40 Emask 0x401 (device error) [ 3022.736645] ata4.00: status: { DRDY DF ERR } [ 3022.740908] ata4.00: error: { ABRT } [ 3022.746137] ata4.00: configured for UDMA/100 [ 3022.746150] ata4: EH complete [ 3022.746321] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3022.752762] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3022.758934] ata4.00: failed command: WRITE DMA EXT [ 3022.763734] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 18 dma 4096 out [ 3022.763734] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3022.778916] ata4.00: status: { DRDY DF ERR } [ 3022.783177] ata4.00: error: { ABRT } [ 3022.788401] ata4.00: configured for UDMA/100 [ 3022.788414] ata4: EH complete [ 3022.788526] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3022.794962] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3022.801135] ata4.00: failed command: WRITE DMA EXT [ 3022.805926] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 19 dma 4096 out [ 3022.805926] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3022.821109] ata4.00: status: { DRDY DF ERR } [ 3022.825378] ata4.00: error: { ABRT } [ 3022.830522] ata4.00: configured for UDMA/100 [ 3022.830536] sd 3:0:0:0: [sdb] [ 3022.830539] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3022.830542] sd 3:0:0:0: [sdb] [ 3022.830544] Sense Key : Hardware Error [current] [descriptor] [ 3022.830547] Descriptor sense data with sense descriptors (in hex): [ 3022.830549] 72 04 44 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3022.830560] 74 70 6d a8 [ 3022.830565] sd 3:0:0:0: [sdb] [ 3022.830568] Add. Sense: Internal target failure [ 3022.830571] sd 3:0:0:0: [sdb] CDB: [ 3022.830573] Write(10): 2a 00 74 70 6d a8 00 00 08 00 [ 3022.830588] end_request: I/O error, dev sdb, sector 1953525160 [ 3022.836419] Buffer I/O error on device sdb, logical block 244190645 [ 3022.842677] lost page write due to I/O error on sdb [ 3022.842684] ata4: EH complete [ 3173.749256] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3173.755725] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3173.761906] ata4.00: failed command: WRITE DMA EXT [ 3173.766706] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 26 dma 4096 out [ 3173.766706] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3173.781898] ata4.00: status: { DRDY DF ERR } [ 3173.786173] ata4.00: error: { ABRT } [ 3173.814504] ata4.00: configured for UDMA/100 [ 3173.814519] ata4: EH complete [ 3173.814703] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3173.821161] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3173.827338] ata4.00: failed command: WRITE DMA EXT [ 3173.832143] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 27 dma 4096 out [ 3173.832143] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3173.847326] ata4.00: status: { DRDY DF ERR } [ 3173.851597] ata4.00: error: { ABRT } [ 3173.857173] ata4.00: configured for UDMA/100 [ 3173.857185] ata4: EH complete [ 3173.857327] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3173.863769] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3173.869939] ata4.00: failed command: WRITE DMA EXT [ 3173.874730] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 28 dma 4096 out [ 3173.874730] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3173.889912] ata4.00: status: { DRDY DF ERR } [ 3173.894175] ata4.00: error: { ABRT } [ 3173.899720] ata4.00: configured for UDMA/100 [ 3173.899733] ata4: EH complete [ 3173.899870] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3173.906303] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3173.912479] ata4.00: failed command: WRITE DMA EXT [ 3173.917271] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 29 dma 4096 out [ 3173.917271] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3173.932452] ata4.00: status: { DRDY DF ERR } [ 3173.936729] ata4.00: error: { ABRT } [ 3173.942167] ata4.00: configured for UDMA/100 [ 3173.942180] ata4: EH complete [ 3173.942326] ata4: limiting SATA link speed to 1.5 Gbps [ 3173.942331] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3173.948766] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3173.954938] ata4.00: failed command: WRITE DMA EXT [ 3173.959741] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 30 dma 4096 out [ 3173.959741] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3173.974921] ata4.00: status: { DRDY DF ERR } [ 3173.979192] ata4.00: error: { ABRT } [ 3173.982778] ata4: hard resetting link [ 3176.402920] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 3176.404640] ata4.00: configured for UDMA/100 [ 3176.404653] ata4: EH complete [ 3176.404818] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3176.411259] ata4.00: irq_stat 0x00020002, device error via D2H FIS [ 3176.417433] ata4.00: failed command: WRITE DMA EXT [ 3176.422228] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 0 dma 4096 out [ 3176.422228] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3176.437321] ata4.00: status: { DRDY DF ERR } [ 3176.441590] ata4.00: error: { ABRT } [ 3176.447106] ata4.00: configured for UDMA/100 [ 3176.447119] sd 3:0:0:0: [sdb] [ 3176.447122] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3176.447125] sd 3:0:0:0: [sdb] [ 3176.447127] Sense Key : Hardware Error [current] [descriptor] [ 3176.447130] Descriptor sense data with sense descriptors (in hex): [ 3176.447132] 72 04 44 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3176.447143] 74 70 6d a8 [ 3176.447148] sd 3:0:0:0: [sdb] [ 3176.447151] Add. Sense: Internal target failure [ 3176.447154] sd 3:0:0:0: [sdb] CDB: [ 3176.447156] Write(10): 2a 00 74 70 6d a8 00 00 08 00 [ 3176.447171] end_request: I/O error, dev sdb, sector 1953525160 [ 3176.453004] Buffer I/O error on device sdb, logical block 244190645 [ 3176.459261] lost page write due to I/O error on sdb [ 3176.459270] ata4: EH complete [ 3288.040078] FS-Cache: Netfs 'cifs' registered for caching [ 3288.040167] Key type cifs.spnego registered [ 3288.040172] Key type cifs.idmap registered [ 3575.533439] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3575.539913] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3575.546093] ata4.00: failed command: WRITE DMA EXT [ 3575.550886] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 6 dma 4096 out [ 3575.550886] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3575.565995] ata4.00: status: { DRDY DF ERR } [ 3575.570267] ata4.00: error: { ABRT } [ 3575.605795] ata4.00: configured for UDMA/100 [ 3575.605804] ata4: EH complete [ 3575.605924] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3575.612381] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3575.618562] ata4.00: failed command: WRITE DMA EXT [ 3575.623370] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 7 dma 4096 out [ 3575.623370] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3575.638473] ata4.00: status: { DRDY DF ERR } [ 3575.642751] ata4.00: error: { ABRT } [ 3575.647991] ata4.00: configured for UDMA/100 [ 3575.648004] ata4: EH complete [ 3575.648132] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3575.654565] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3575.660738] ata4.00: failed command: WRITE DMA EXT [ 3575.665530] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 8 dma 4096 out [ 3575.665530] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3575.680627] ata4.00: status: { DRDY DF ERR } [ 3575.684895] ata4.00: error: { ABRT } [ 3575.690081] ata4.00: configured for UDMA/100 [ 3575.690093] ata4: EH complete [ 3575.690204] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3575.696636] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3575.702811] ata4.00: failed command: WRITE DMA EXT [ 3575.707603] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 9 dma 4096 out [ 3575.707603] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3575.722697] ata4.00: status: { DRDY DF ERR } [ 3575.726965] ata4.00: error: { ABRT } [ 3575.732095] ata4.00: configured for UDMA/100 [ 3575.732108] ata4: EH complete [ 3575.732230] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3575.738671] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3575.744847] ata4.00: failed command: WRITE DMA EXT [ 3575.749640] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 10 dma 4096 out [ 3575.749640] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3575.764821] ata4.00: status: { DRDY DF ERR } [ 3575.769089] ata4.00: error: { ABRT } [ 3575.774229] ata4.00: configured for UDMA/100 [ 3575.774241] ata4: EH complete [ 3575.774352] ata4.00: limiting speed to UDMA/66:PIO4 [ 3575.774354] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3575.780787] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3575.786961] ata4.00: failed command: WRITE DMA EXT [ 3575.791752] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 11 dma 4096 out [ 3575.791752] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3575.806934] ata4.00: status: { DRDY DF ERR } [ 3575.811203] ata4.00: error: { ABRT } [ 3575.814782] ata4: hard resetting link [ 3578.237235] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 3578.238944] ata4.00: configured for UDMA/66 [ 3578.238957] sd 3:0:0:0: [sdb] [ 3578.238960] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3578.238963] sd 3:0:0:0: [sdb] [ 3578.238966] Sense Key : Hardware Error [current] [descriptor] [ 3578.238969] Descriptor sense data with sense descriptors (in hex): [ 3578.238971] 72 04 44 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3578.238981] 74 70 6d a8 [ 3578.238987] sd 3:0:0:0: [sdb] [ 3578.238990] Add. Sense: Internal target failure [ 3578.238993] sd 3:0:0:0: [sdb] CDB: [ 3578.238994] Write(10): 2a 00 74 70 6d a8 00 00 08 00 [ 3578.239010] end_request: I/O error, dev sdb, sector 1953525160 [ 3578.244850] Buffer I/O error on device sdb, logical block 244190645 [ 3578.251108] lost page write due to I/O error on sdb [ 3578.251114] ata4: EH complete [ 3593.928223] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3593.934678] ata4.00: irq_stat 0x00020002, device error via D2H FIS [ 3593.940857] ata4.00: failed command: WRITE DMA EXT [ 3593.945660] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 14 dma 4096 out [ 3593.945660] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3593.960872] ata4.00: status: { DRDY DF ERR } [ 3593.965144] ata4.00: error: { ABRT } [ 3593.993544] ata4.00: configured for UDMA/66 [ 3593.993559] ata4: EH complete [ 3593.993715] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3594.000165] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3594.006354] ata4.00: failed command: WRITE DMA EXT [ 3594.011163] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 15 dma 4096 out [ 3594.011163] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3594.026349] ata4.00: status: { DRDY DF ERR } [ 3594.030630] ata4.00: error: { ABRT } [ 3594.036145] ata4.00: configured for UDMA/66 [ 3594.036157] ata4: EH complete [ 3594.036295] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3594.042735] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3594.048910] ata4.00: failed command: WRITE DMA EXT [ 3594.053710] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 16 dma 4096 out [ 3594.053710] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3594.068892] ata4.00: status: { DRDY DF ERR } [ 3594.073161] ata4.00: error: { ABRT } [ 3594.078676] ata4.00: configured for UDMA/66 [ 3594.078688] ata4: EH complete [ 3594.078824] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3594.085266] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3594.091441] ata4.00: failed command: WRITE DMA EXT [ 3594.096232] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 17 dma 4096 out [ 3594.096232] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3594.111412] ata4.00: status: { DRDY DF ERR } [ 3594.115682] ata4.00: error: { ABRT } [ 3594.121089] ata4.00: configured for UDMA/66 [ 3594.121102] ata4: EH complete [ 3594.121264] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3594.127701] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3594.133882] ata4.00: failed command: WRITE DMA EXT [ 3594.138676] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 18 dma 4096 out [ 3594.138676] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3594.153856] ata4.00: status: { DRDY DF ERR } [ 3594.158127] ata4.00: error: { ABRT } [ 3594.163474] ata4.00: configured for UDMA/66 [ 3594.163482] ata4: EH complete [ 3594.163630] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3594.170065] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3594.176239] ata4.00: failed command: WRITE DMA EXT [ 3594.181032] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 19 dma 4096 out [ 3594.181032] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3594.196214] ata4.00: status: { DRDY DF ERR } [ 3594.200492] ata4.00: error: { ABRT } [ 3594.205856] ata4.00: configured for UDMA/66 [ 3594.205867] sd 3:0:0:0: [sdb] [ 3594.205869] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3594.205872] sd 3:0:0:0: [sdb] [ 3594.205874] Sense Key : Hardware Error [current] [descriptor] [ 3594.205878] Descriptor sense data with sense descriptors (in hex): [ 3594.205880] 72 04 44 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3594.205890] 74 70 6d a8 [ 3594.205895] sd 3:0:0:0: [sdb] [ 3594.205899] Add. Sense: Internal target failure [ 3594.205901] sd 3:0:0:0: [sdb] CDB: [ 3594.205903] Write(10): 2a 00 74 70 6d a8 00 00 08 00 [ 3594.205913] end_request: I/O error, dev sdb, sector 1953525160 [ 3594.211736] Buffer I/O error on device sdb, logical block 244190645 [ 3594.217998] lost page write due to I/O error on sdb [ 3594.218005] ata4: EH complete [ 3662.119993] ata4.00: limiting speed to UDMA/33:PIO4 [ 3662.120001] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3662.126450] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3662.132622] ata4.00: failed command: WRITE DMA EXT [ 3662.137412] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 22 dma 4096 out [ 3662.137412] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3662.152601] ata4.00: status: { DRDY DF ERR } [ 3662.156863] ata4.00: error: { ABRT } [ 3662.160432] ata4: hard resetting link [ 3664.579257] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 3664.580992] ata4.00: configured for UDMA/33 [ 3664.581005] ata4: EH complete [ 3664.581140] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3664.587601] ata4.00: irq_stat 0x00020002, device error via D2H FIS [ 3664.593788] ata4.00: failed command: WRITE DMA EXT [ 3664.598597] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 23 dma 4096 out [ 3664.598597] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3664.613786] ata4.00: status: { DRDY DF ERR } [ 3664.618067] ata4.00: error: { ABRT } [ 3664.623364] ata4.00: configured for UDMA/33 [ 3664.623377] ata4: EH complete [ 3664.623541] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3664.629981] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3664.636155] ata4.00: failed command: WRITE DMA EXT [ 3664.640945] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 24 dma 4096 out [ 3664.640945] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3664.656128] ata4.00: status: { DRDY DF ERR } [ 3664.660398] ata4.00: error: { ABRT } [ 3664.665458] ata4.00: configured for UDMA/33 [ 3664.665466] ata4: EH complete [ 3664.665575] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3664.672006] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3664.678182] ata4.00: failed command: WRITE DMA EXT [ 3664.682973] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 25 dma 4096 out [ 3664.682973] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3664.698155] ata4.00: status: { DRDY DF ERR } [ 3664.702433] ata4.00: error: { ABRT } [ 3664.707550] ata4.00: configured for UDMA/33 [ 3664.707563] ata4: EH complete [ 3664.707695] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3664.714130] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3664.720306] ata4.00: failed command: WRITE DMA EXT [ 3664.725105] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 26 dma 4096 out [ 3664.725105] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3664.740288] ata4.00: status: { DRDY DF ERR } [ 3664.744556] ata4.00: error: { ABRT } [ 3664.749777] ata4.00: configured for UDMA/33 [ 3664.749789] ata4: EH complete [ 3664.749945] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 3664.756382] ata4.00: irq_stat 0x00060002, device error via D2H FIS [ 3664.762557] ata4.00: failed command: WRITE DMA EXT [ 3664.767350] ata4.00: cmd 35/00:08:a8:6d:70/00:00:74:00:00/e0 tag 27 dma 4096 out [ 3664.767350] res 61/04:08:a8:6d:70/00:00:74:00:00/e0 Emask 0x1 (device error) [ 3664.782532] ata4.00: status: { DRDY DF ERR } [ 3664.786802] ata4.00: error: { ABRT } [ 3664.792007] ata4.00: configured for UDMA/33 [ 3664.792020] sd 3:0:0:0: [sdb] [ 3664.792023] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 3664.792026] sd 3:0:0:0: [sdb] [ 3664.792028] Sense Key : Hardware Error [current] [descriptor] [ 3664.792032] Descriptor sense data with sense descriptors (in hex): [ 3664.792033] 72 04 44 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 3664.792044] 74 70 6d a8 [ 3664.792049] sd 3:0:0:0: [sdb] [ 3664.792052] Add. Sense: Internal target failure [ 3664.792055] sd 3:0:0:0: [sdb] CDB: [ 3664.792057] Write(10): 2a 00 74 70 6d a8 00 00 08 00 [ 3664.792073] end_request: I/O error, dev sdb, sector 1953525160 [ 3664.797902] Buffer I/O error on device sdb, logical block 244190645 [ 3664.804168] lost page write due to I/O error on sdb [ 3664.804175] ata4: EH complete