180103-232927 root@catbox:/home/furuta# /sbin/smartctl -a /dev/sdb smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-85-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD7500BPVT-00HXZT1 Serial Number: WD-WX81A5070163 LU WWN Device Id: 5 0014ee 259f018cd Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Jan 3 23:29:41 2018 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x00)Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0)The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01)Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 185) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035)SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 198 198 051 Pre-fail Always - 3884 3 Spin_Up_Time 0x0027 201 178 021 Pre-fail Always - 941 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 648131 5 Reallocated_Sector_Ct 0x0033 133 133 140 Pre-fail Always FAILING_NOW 531 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 052 052 000 Old_age Always - 35287 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 174 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 113 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 796096 194 Temperature_Celsius 0x0022 124 088 000 Old_age Always - 23 196 Reallocated_Event_Count 0x0032 001 001 000 Old_age Always - 267 197 Current_Pending_Sector 0x0032 001 001 000 Old_age Always - 65213 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.