[root@blackflat /sys/class]# dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33.3-85.fc13.x86_64 (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP Thu May 6 18:09:49 UTC 2010 Command line: ro root=UUID=0443e317-1beb-43af-927e-ac53803276f3 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=ja_JP.UTF-8 KEYTABLE=jp106 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable) BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS) BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data) BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. No AGP bridge found last_pfn = 0x120000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 080000000 mask FC0000000 write-back 2 base 0C0000000 mask FF0000000 write-back 3 base 0CFE00000 mask FFFE00000 uncachable 4 base 100000000 mask FE0000000 write-back 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3326MB, range: 2MB, type UC reg 4, base: 4GB, range: 512MB, type WB total RAM covered: 3838M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 4M num_reg: 5 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3326MB, range: 2MB, type UC reg 4, base: 4GB, range: 512MB, type WB e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f5520] f5520 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfdf0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfc00000 page 2M 00cfc00000 - 00cfdf0000 page 4k kernel direct mapping tables up to cfdf0000 @ 8000-b000 init_memory_mapping: 0000000100000000-0000000120000000 0100000000 - 0120000000 page 2M kernel direct mapping tables up to 120000000 @ a000-c000 RAMDISK: 3742c000 - 37fefa17 ACPI: RSDP 00000000000f6ef0 00014 (v00 GBT ) ACPI: RSDT 00000000cfdf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfdf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfdf10c0 04562 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) ACPI: FACS 00000000cfdf0000 00040 ACPI: HPET 00000000cfdf5700 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfdf5740 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: MATS 00000000cfdf5780 00034 (v01 GBT 00000000 00000000) ACPI: APIC 00000000cfdf5640 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: SSDT 00000000cfdf5830 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000120000000 Bootmem setup node 0 0000000000000000-0000000120000000 NODE_DATA [000000000000b000 - 0000000000020fff] bootmap [0000000000021000 - 0000000000044fff] pages 24 (13 early reservations) ==> bootmem [0000000000 - 0120000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001db92c8] TEXT DATA BSS ==> [0001000000 - 0001db92c8] #2 [003742c000 - 0037fefa17] RAMDISK ==> [003742c000 - 0037fefa17] #3 [0001dba000 - 0001dba0fe] BRK ==> [0001dba000 - 0001dba0fe] #4 [00000f5530 - 0000100000] BIOS reserved ==> [00000f5530 - 0000100000] #5 [00000f5520 - 00000f5530] MP-table mpf ==> [00000f5520 - 00000f5530] #6 [000009b800 - 00000f1100] BIOS reserved ==> [000009b800 - 00000f1100] #7 [00000f125c - 00000f5520] BIOS reserved ==> [00000f125c - 00000f5520] #8 [00000f1100 - 00000f125c] MP-table mpc ==> [00000f1100 - 00000f125c] #9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #11 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #12 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001e00000-ffff8800053fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00120000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009b 0: 0x00000100 -> 0x000cfdf0 0: 0x00100000 -> 0x00120000 On node 0 totalpages: 982411 DMA zone: 56 pages used for memmap DMA zone: 109 pages reserved DMA zone: 3830 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833064 pages, LIFO batch:31 Normal zone: 1792 pages used for memmap Normal zone: 129280 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 6 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000 PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000 PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000 PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at cff00000 (gap: cff00000:10100000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 30 pages/cpu @ffff880005600000 s90520 r8192 d24168 u262144 pcpu-alloc: s90520 r8192 d24168 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 966174 Policy zone: Normal Kernel command line: ro root=UUID=0443e317-1beb-43af-927e-ac53803276f3 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=ja_JP.UTF-8 KEYTABLE=jp106 rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3780840k/4718592k available (4295k kernel code, 788948k absent, 148804k reserved, 7535k data, 756k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:472 Console: colour VGA+ 80x25 console [tty0] enabled allocated 39321600 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 1596.561 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.11 BogoMIPS (lpj=1596559) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD E-350 Processor stepping 00 Booting Node 0, Processors #1 Brought up 2 CPUs Total of 2 processors activated (6385.51 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=792 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5968 bytes devtmpfs: initialized regulator: core version 0.5 Time: 0:39:32 Date: 02/22/11 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored) pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:01.0: reg 14: [io 0xf800-0xf8ff] pci 0000:00:01.0: reg 18: [mem 0xfdfc0000-0xfdffffff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.1: reg 10: [mem 0xfe020000-0xfe023fff] pci 0000:00:01.1: supports D1 D2 pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:15.0: supports D1 D2 pci 0000:00:15.1: supports D1 D2 pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:16.2: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xe000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff] pci 0000:02:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xfddf8000-0xfddfbfff 64bit pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:15.0: PCI bridge to [bus 02-02] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] pci 0000:00:15.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:15.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0xfdcfe000-0xfdcfffff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:15.1: PCI bridge to [bus 03-03] pci 0000:00:15.1: bridge window [io 0xc000-0xcfff] pci 0000:00:15.1: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:15.1: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI Warning for \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20091214/nspredef-455) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0220-0x0225] has been reserved system 00:01: [io 0x0290-0x0294] has been reserved system 00:02: [io 0x0900-0x091f] has been reserved system 00:02: [io 0x0228-0x022f] has been reserved system 00:02: [io 0x040b] has been reserved system 00:02: [io 0x04d6] has been reserved system 00:02: [io 0x0c00-0x0c01] has been reserved system 00:02: [io 0x0c14] has been reserved system 00:02: [io 0x0c50-0x0c52] has been reserved system 00:02: [io 0x0c6c-0x0c6d] has been reserved system 00:02: [io 0x0c6f] has been reserved system 00:02: [io 0x0cd0-0x0cd1] has been reserved system 00:02: [io 0x0cd2-0x0cd3] has been reserved system 00:02: [io 0x0cd4-0x0cdf] has been reserved system 00:02: [io 0x0800-0x08fe] has been reserved system 00:02: [io 0x0a10-0x0a17] has been reserved system 00:02: [io 0x0b00-0x0b0f] has been reserved system 00:02: [io 0x0b10-0x0b1f] has been reserved system 00:02: [io 0x0b20-0x0b3f] has been reserved system 00:08: [mem 0xe0000000-0xefffffff] has been reserved system 00:09: [mem 0x000d6000-0x000d7fff] has been reserved system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved system 00:09: [mem 0xcfdf0000-0xcfdfffff] could not be reserved system 00:09: [mem 0xffff0000-0xffffffff] has been reserved system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved system 00:09: [mem 0x00100000-0xcfdeffff] could not be reserved system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:00:14.4: PCI bridge to [bus 01-01] pci 0000:00:14.4: bridge window [io 0xe000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] pci 0000:00:15.0: PCI bridge to [bus 02-02] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] pci 0000:00:15.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:15.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] pci 0000:00:15.1: PCI bridge to [bus 03-03] pci 0000:00:15.1: bridge window [io 0xc000-0xcfff] pci 0000:00:15.1: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:15.1: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:15.0: setting latency timer to 64 pci 0000:00:15.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:15.1: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfd900000-0xfd9fffff] pci_bus 0000:01: resource 2 [mem 0xfda00000-0xfdafffff pref] pci_bus 0000:01: resource 3 [io 0x0000-0xffff] pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:00:01.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 12046k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff8800057de000 - ffff8800097de000 software IO TLB at phys 0x57de000 - 0x97de000 Intel PCLMULQDQ-NI instructions are not detected. audit: initializing netlink socket (disabled) type=2000 audit(1298335171.761:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7407 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:15.0: setting latency timer to 64 alloc irq_desc for 24 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:15.0: irq 24 for MSI/MSI-X pcieport 0000:00:15.1: setting latency timer to 64 alloc irq_desc for 25 on node -1 alloc kstat_irqs on node -1 pcieport 0000:00:15.1: irq 25 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:11.0: version 3.0 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 19 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 19 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 19 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 19 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ehci_hcd usb usb3: SerialNumber: 0000:00:16.2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb4: SerialNumber: 0000:00:12.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 5 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb6: SerialNumber: 0000:00:14.5 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 ohci_hcd usb usb7: SerialNumber: 0000:00:16.0 hub 7-0:1.0: USB hub found hub 7-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 15:755:658 block ram11: hash matches rtc_cmos 00:04: setting system clock to 2011-02-22 00:39:33 UTC (1298335173) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata4: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) usb 5-1: new low speed USB device using ohci_hcd and address 2 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD5000BEVT-22ZAT0, 01.01A01, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 756k freed Write protecting the kernel read-only data: 10240k Freeing unused kernel memory: 1828k freed Freeing unused kernel memory: 1960k freed dracut: dracut-005-3.fc13 dracut: rd_NO_LUKS: removing cryptoluks activation dracut: rd_NO_LVM: removing LVM activation udev: starting version 151 usb 5-1: New USB device found, idVendor=045e, idProduct=0040 usb 5-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 usb 5-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) usb 5-1: Manufacturer: Microsoft input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input4 generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0 dracut: Starting plymouth daemon dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 EXT4-fs (sda3): mounted filesystem with ordered data mode dracut: Remounting /dev/disk/by-uuid/0443e317-1beb-43af-927e-ac53803276f3 with -o noatime,ro EXT4-fs (sda3): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/sda3 dracut: Loading SELinux policy SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1298335175.585:2): selinux=0 auid=4294967295 ses=4294967295 dracut: /sbin/load_policy: : dracut: Switching root readahead: starting udev: starting version 151 microcode: CPU0: patch_level=0x5000028 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 xhci_hcd 0000:03:00.0: setting latency timer to 64 xhci_hcd 0000:03:00.0: xHCI Host Controller xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 xhci_hcd 0000:03:00.0: irq 17, io mem 0xfdcfe000 usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: xHCI Host Controller usb usb8: Manufacturer: Linux 2.6.33.3-85.fc13.x86_64 xhci_hcd usb usb8: SerialNumber: 0000:03:00.0 xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 8-0:1.0: USB hub found hub 8-0:1.0: 4 ports detected microcode: CPU1: patch_level=0x5000028 platform microcode: firmware: requesting amd-ucode/microcode_amd.bin microcode: Microcode Update Driver: v2.00 , Peter Oruba r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: unknown MAC, using family default alloc irq_desc for 26 on node -1 alloc kstat_irqs on node -1 r8169 0000:02:00.0: irq 26 for MSI/MSI-X eth0: RTL8168b/8111b at 0xffffc9001110e000, 1c:6f:65:c1:xx:xx, XID 0c200000 IRQ 26 fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Disabling lock debugging due to kernel taint [fglrx] Maximum main memory to use for locked dma buffers: 3550 MBytes. [fglrx] vendor: 1002 device: 9802 count: 1 [fglrx] ioport: bar 1, base 0xf800, size: 0x100 pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:01.0: setting latency timer to 64 [fglrx] Kernel PAT support is enabled [fglrx] module loaded - fglrx 8.82.8 [Jan 26 2011] with 1 minors piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported microcode: AMD microcode update via /dev/cpu/microcode not supported HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 27 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:01.1: irq 27 for MSI/MSI-X HDA Intel 0000:00:01.1: setting latency timer to 64 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 hda_codec: ALC892: BIOS auto-probing. ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:4288: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4292: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:4293: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:4296: dig-out=0x11/0x1e ALSA sound/pci/hda/hda_codec.c:4304: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/patch_realtek.c:1297: realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d ALSA sound/pci/hda/patch_realtek.c:1313: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892 ALSA sound/pci/hda/hda_codec.c:407: Too many connections EXT4-fs (sda1): mounted filesystem with ordered data mode Adding 5242872k swap on /dev/sda2. Priority:-1 extents:1 across:5242872k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team r8169: eth0: link up r8169: eth0: link up powernow-k8: Found 1 AMD E-350 Processor processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (1600 MHz) powernow-k8: 1 : pstate 1 (1280 MHz) powernow-k8: 2 : pstate 2 (800 MHz) [Firmware Warn]: powernow-k8: Invalid zero transition latency [Firmware Warn]: powernow-k8: Invalid zero transition latency RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. it87: Found IT8720F chip at 0x228, revision 8 it87: in3 is VCC (+5V) it87 it87.552: Detected broken BIOS defaults, disabling PWM interface hwmon-vid: Unknown VRM version of your x86 CPU eth0: no IPv6 routers present alloc irq_desc for 28 on node -1 alloc kstat_irqs on node -1 fglrx_pci 0000:00:01.0: irq 28 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 1568 [fglrx] Firegl kernel thread PID: 1569 [fglrx] Firegl kernel thread PID: 1570 [fglrx] IRQ 28 Enabled [fglrx] Gart USWC size:1160 M. [fglrx] Gart cacheable size:459 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fc51000, size:3a3000 [fglrx] Reserved FB block: Unshared offset:fff4000, size:c000 hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. fuse init (API version 7.13) [fglrx] IRQ 28 Disabled fglrx_pci 0000:00:01.0: irq 28 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 2511 [fglrx] Firegl kernel thread PID: 2512 [fglrx] Firegl kernel thread PID: 2513 [fglrx] IRQ 28 Enabled [fglrx] Gart USWC size:1160 M. [fglrx] Gart cacheable size:459 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fc51000, size:3a3000 [fglrx] Reserved FB block: Unshared offset:fff4000, size:c000 [fglrx] IRQ 28 Disabled fglrx_pci 0000:00:01.0: irq 28 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 3339 [fglrx] Firegl kernel thread PID: 3340 [fglrx] Firegl kernel thread PID: 3341 [fglrx] IRQ 28 Enabled [fglrx] Gart USWC size:1160 M. [fglrx] Gart cacheable size:459 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fc51000, size:3a3000 [fglrx] Reserved FB block: Unshared offset:fff4000, size:c000 [fglrx] IRQ 28 Disabled fglrx_pci 0000:00:01.0: irq 28 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 3918 [fglrx] Firegl kernel thread PID: 3919 [fglrx] Firegl kernel thread PID: 3920 [fglrx] IRQ 28 Enabled [fglrx] Gart USWC size:1160 M. [fglrx] Gart cacheable size:459 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fc51000, size:3a3000 [fglrx] Reserved FB block: Unshared offset:fff4000, size:c000 CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load CPUFREQ: Per core ondemand sysfs interface is deprecated - powersave_bias CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate_max CPUFREQ: ondemand sampling_rate_max sysfs file is deprecated - used by: cat CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate_min CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold