U-Boot 1.1.4 (Nov 27 2008 - 10:23:35) U-Boot code: 00000000 -> 000195D4 BSS: -> 0001E528 CPU Clock: 200 MHz 1.8V Vdd Output: 1.793 2.5V Vdd Output: 2.531 ==== PCI Device List Start ==== bus:00 device:02 function:00 vendor:1814 device_id:0302 class:0280 interrupt:06 ==== PCI Device List End ==== RAM Configuration: Bank #0: 00000000 32 MB Flash Manufacturer: MXIC Flash Device: MXLV640BT(8MB) Flash: 8 MB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Hit any key to stop autoboot: 1 0 ## Starting application at 0x10030000 ... Uncompressing Linux...................................................................................................................... done, booting the kernel. Linux version 2.6.16-star (root@richdeb) (gcc version 3.4.6) #1 Tue Oct 6 14:42:54 CST 2009 CPU: FA526id(wb) [66015261] revision 1 (ARMv4) Machine: STAR STR9100 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets CPU0: D cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets CPU clock at 200MHz AHB clock at 100MHz APB clock at 50MHz Enable I-ScratchPad Address Start : c0027000 Built 1 zonelists Kernel command line: root=/dev/ram0 mem=32M panic=1 PID hash table entries: 256 (order: 8, 4096 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 32MB = 32MB total Memory: 24804KB available (3021K code, 690K data, 124K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 3750K NET: Registered protocol family 16 PCI clock at 33M PCI: bus0: Fast back to back transfers disabled PCI Bridge found PCI map irq: 00:00.00 slot 0, pin 1, irq: 0 PCI map irq: 00:02.00 slot 2, pin 1, irq: 6 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NetWinder Floating Point Emulator V0.97 (extended precision) JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. io scheduler noop registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x78000000 (irq = 10) is a 16550A RAMDISK driver initialized: 4 RAM disks of 12000K size 1024 blocksize loop: loaded (max 8 devices) VLAN0_VLAN_TAG: 0 init IC+101A init IC+101A Intel(R) PRO/1000 Network Driver - version 7.3.15-NAPI Copyright (c) 1999-2006 Intel Corporation. PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered NET: Registered protocol family 24 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). Linux video capture interface: v1.00 STR9100 NAND Flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 STR9100 NAND Flash: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 4 MTD partitions on "STR9100 NAND Flash": 0x00000000-0x00030000 : "UBOOT" 0x00030000-0x00700000 : "BootpImage" 0x00700000-0x007f0000 : "UI Customization" 0x007f0000-0x00800000 : "User config" str9100-ehci str9100-ehci: str9100-ehci str9100-ehci str9100-ehci: new USB bus registered, assigned bus number 1 str9100-ehci str9100-ehci: irq 24, io mem 0xcc000000 str9100-ehci str9100-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v2.3 usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. u32 classifier Netfilter messages via NETLINK v0.30. NET: Registered protocol family 2 IP route cache hash table entries: 512 (order: -1, 2048 bytes) TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack ctnetlink v0.90: registering with nfnetlink. ip_conntrack_pptp version 3.1 loaded ip_nat_pptp version 3.0 loaded ip_tables: (C) 2000-2006 Netfilter Core Team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing init memory: 124K Using /lib/modules/2.6.16-star/kernel/drivers/usb/host/ohci-hcd.ko ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (STR9100) str9100-ohci str9100-ohci: str9100-ohci str9100-ohci str9100-ohci: new USB bus registered, assigned bus number 2 str9100-ohci str9100-ohci: irq 23, io mem 0xc4000000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected 128+0 records in 128+0 records out 1920+0 records in 1920+0 records out EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended cmd[ifconfig eth0 hw ether 00246b003f53] cmd[ifconfig eth1 hw ether 00246b003f54] Using /lib/modules/gspca.ko usbcore: registered new driver gspca /loas-3.0.12l/user/gspcav1-20071224/gspca_core.c: gspca driver 01.00.20 registered Using /lib/modules/uvcvideo.ko usbcore: registered new driver uvcvideo USB Video Class driver (v0.1.0) Using /lib/modules/pwc.ko pwc: Philips webcam module version 10.0.12-rc1 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usbcore: registered new driver Philips webcam open mac port 0 star_ioctl: Unsupport command device eth0 entered promiscuous mode Using /lib/modules/str9100_shnat.ko str9100_shnat: no version for "struct_module" found: kernel tainted. str9100_shnat: module license 'Proprietary' taints kernel. star_ioctl: Unsupport command Enter Smart HNAT Orion Twin forwarding mode [RLDBG] init_func_ptr: HOOK POINT INIT OK STAR9100 Software HNAT Driver Initialized ============= Roy add applyfunc test detect =============== killall: upnpd: no process killed bre0: port 1(eth0) entering learning state Using /lib/modules/rt61ap.ko The UUID Hex string is:bc329e001dd811b297d800d041ba8268 The UUID ASCII string is:bc329e00-1dd8-11b2-97d8-00d041ba8268! device ra0 entered promiscuous mode =========================>set wireless bre0: port 2(ra0) entering learning state info, udhcpd (v0.9.9-pre) started error, max_leases value (251) not sane, setting to 98 instead iptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables: No chain/target/match by that name iptables v1.3.8: Couldn't find target `LOG' Try `iptables -h' or 'iptables --help' for more information. open mac port 1 55555------rmmod usbserial----- rmmod: usbserial: No such file or directory USB device changed! USB device changed! DDNS disabled SambaServer:[Disable] bre0: topology change detected, propagating bre0: port 1(eth0) entering forwarding state USB device changed! etop>dnsmasq: started, version 2.22 cachesize 150 dnsmasq: cleared cache dnsmasq: reading /etc/resolv.conf bre0: topology change detected, propagating bre0: port 2(ra0) entering forwarding state